Vee- ja elektriühendused WC-s Tulevikuga arvestades
Tuleviku mugavusnõudeid silmas pidades
Tavaline töökindel WC vettsäästva kahesüsteemse loputusega võib olla täna piisav, aga kõigest paari aasta pärast võib koduomanik soovida lisada dušš WC-potti või lõhnaeemaldust. Ideaalmaailmas oleksid kõik vajalikud ühendused juba ettevalmistatud, sest siis ei tule teha kulukaid ümberehitustöid.
Geberiti uus pistikupesa ja kommunikatsioonikarp muudab WC vooluvõrgu ühenduse integreerimise paigalduselemendisse lihtsaks. See loob ideaalsed tingimused erinevate mugavus- ja lisafunktsioonide kasutamiseks vannitoas.

Ettevalmistatud Geberit AquaCleani dušš WC-poti jaoks
Geberit on muutnud seinapealsete WC-pottide paigalduselemente nii, et need vastaks tuleviku turunõuetele. Geberit Duofix, Geberit GIS või Geberit Kombifix: kõigil neil paigalduselementidel on juba standardvarustuses Geberit AquaCleani duši-WC tühitorud peidetud veevarustustoru jaoks.
Lisaks on neil elektriühenduse tühitoru kinnitusvõimalus. Kõik peidetud paigaldised on seega juba Geberit AquaCleani duši-WC-poti hilisemaks paigaldamiseks optimaalselt valmis.

Frequently asked questions about electrical and water connections built onto the WC
Which Geberit products is the Power & Connect Box compatible with?
The Power & Connect Box is compatible with the Geberit GIS and Geberit Duofix installation systems in combination with 12-cm deep cisterns and all Geberit WC ceramic appliances.
Where is the outlet mounting box placed?
The outlet mounting box is invisible behind the toilet on the installation element for the WC. For example, the 12 V cable can be routed directly from the outlet mounting box to the odour extraction unit via an integrated conduit pipe.
In a private bathroom, this invisible placement ensures a neat and tidy appearance. In semipublic or public sanitary facilities, its position protects it from vandalism.
Why should you consider an additional electrical and water supply connection built onto the WC, right from the planning stage?
Nowadays, installation systems and cisterns are usually installed behind the wall and are therefore invisible.
If the connections for electricity and water are available from the outset on the installation element for the WC, the wall does not need to be opened later if, for example, a shower toilet or an orientation light is to be retrofitted.
Installing connections from the start means you can avoid subsequent costs and complex structural work.
How high are the costs for the initial installation of a Power & Connect Box compared to a retrofit?
The extra cost for the product is low.
Compared to the cost of retrofitting, which requires the wall to be opened and the WC installation element to be replaced, initial installation is significantly cheaper.